Morando VK17
Machine Capacity
Maximum Swing With Side Head: 71″
Maximum Swing With Ram Head And Side Head In Forrest Position: 75″
Maximum Turning Height: 53″
Maximum Height Under Cross Rail: 56″
Table
Table Diameter: 67″
Maximum Weight Of Workpiece: 10 ton
Table Speeds: 16
Standard Speed Range
High Speed Range: 49–120 RPM
Low Speed Range: 5–150 RPM
Extra Low Speed Range: 3–90 RPM
Side Head
Vertical Traverse Along Column: 53″
Working Stroke Of Slide: 28″
Vertical Heads
Amount Of Swivel Of Ram And Turret Head: 35°
Horizontal Travel Of Heads On Cross Rail: 43″
Stroke Of Slide On Ram Head: 39″
Stroke Of Turret Slide: 30″
Diameter Of Holes Of The Pentagonal Turret: 3 5/32″
Rapid Traverse Of Heads
95 in/min
Cross Rail
Vertical Travel Along Column: 42″
Speed Of Travel: 14 in/min
Feeds (Vertical Or Cross Feed)
Range Of Feed Per Revolution Of Table: .0026–.500″
Driving Power
Main Motor (1500 RPM): 50 HP
Rapid Traverse Motor (1000 RPM): 5 HP
Maximum Total Cutting Force: 13,200 lbs working on Ø 55″
Maximum Torque On Table: 38,500 lbs/ft
Size Of Tools: 2 x 1 3/8″
Cast Iron Chip Section About: 0.110 sq/in
R70 Steel Chip Section About: 0.055 sq/in
Weight & Dimensions
Net Weight (With Turret And Ram Head): 58,200 lbs
Overall Dimensions (With Turret Head): 11′ x 14′ x 12′
Overall Dimensions (With Turret And Ram Head): 14′ x 14′ x 12′
Free
Torno Vertical Morando VK17 Machine Capacity
Maximum Swing With Side Head: 71″
Maximum Swing With Ram Head And Side Head In Forrest Position: 75″
Maximum Turning Height: 53″
Maximum Height Under Cross Rail: 56″
Table
Table Diameter: 67″
Maximum Weight Of Workpiece: 10 ton
Table Speeds: 16
Standard Speed Range
High Speed Range: 49–120 RPM
Low Speed Range: 5–150 RPM
Extra Low Speed Range: 3–90 RPM
Side Head
Vertical Traverse Along Column: 53″
Working Stroke Of Slide: 28″
Vertical Heads
Amount Of Swivel Of Ram And Turret Head: 35°
Horizontal Travel Of Heads On Cross Rail: 43″
Stroke Of Slide On Ram Head: 39″
Stroke Of Turret Slide: 30″
Diameter Of Holes Of The Pentagonal Turret: 3 5/32″
Rapid Traverse Of Heads
95 in/min
Cross Rail
Vertical Travel Along Column: 42″
Speed Of Travel: 14 in/min
Feeds (Vertical Or Cross Feed)
Range Of Feed Per Revolution Of Table: .0026–.500″
Driving Power
Main Motor (1500 RPM): 50 HP
Rapid Traverse Motor (1000 RPM): 5 HP
Maximum Total Cutting Force: 13,200 lbs working on Ø 55″
Maximum Torque On Table: 38,500 lbs/ft
Size Of Tools: 2 x 1 3/8″
Cast Iron Chip Section About: 0.110 sq/in
R70 Steel Chip Section About: 0.055 sq/in
Weight & Dimensions
Net Weight (With Turret And Ram Head): 58,200 lbs
Overall Dimensions (With Turret Head): 11′ x 14′ x 12′
Overall Dimensions (With Turret And Ram Head): 14′ x 14′ x 12′
También te puede interesar...
Cotiza con nosotros
Cuéntanos qué necesitas y te enviaremos una cotización personalizada en poco tiempo